Standard microchannel plates (MCPs)

Basic application of Microchannel plates (MCPs) is Night Vision Technique. MCP is the main element of an Image Intensifier Tube (IIT), which is in its turn the primary element of a Night vision device (NVD). Therefore, the performance of a NVD greatly depends on MCP characteristics. LLC "BASPIK" produces Microchannel Plates of different configurations: round, square, rectangular, with center hole, having 4, 5, 6, 8, 10 μm pores. Channel diameter spread is not higher than 1.3%

MCP's types

Active Area diameter (mm)	18				25
Channel diameter (μm)	5	6	8	10	5	6	8	10
		6y	8y	10y		6y	8y	10y

Science and Technology

Nonstandard Microchannel plates (MCPs)

Science and Technology

VTC BASPIK Ltd. produces Microchannel plates (MCPs) for different scientific and technical equipment. MCPs are used for intensification of weak signals inside image detectors.

Uniqueness of VTC BASPIK Ltd. is that we can manufacture MCPs for your individual application, on order, in accordance with agreed specifications.

MCP's types

Active Area diameter (dimensions)(mm)	46	50	56			43х63	70х90	70х90у
Channel diameter (μm)	12	15	12	15	15CH	12	15	15

MCP-Detectors and SEM

Detectors and Electron Multipliers

MCP-Detectors and SEM

Detectors, manufactured by VTC BASPIK Ltd. are made of high-quality MCPs, which may differ in size, configuration and technical characteristics. Basic advantage of VTC BASPIK Ltd. is that we manufacture detectors on your individual order, according to specifications prepared by customer.

MCP-Detectors' types

Active Area diameter (dimensions)(mm)	18	25		50	56	43x63
Channel diameter(μm)	8 Detector with MCP 18-8, open input & separated supply	8 Detector with MCP 25-8 open input & separated supply	10 Detector with MCP 25-10 and open input	12 Detector with MCP 50-12, open input & separated supply	12 Detector with MCP 56 - 12, a large input window & separated supply	12 Detector with rectangular MCP 43×63, the section collector & separated supply

Extended specification

SEM types

SEM-6M

SEM-7M

News:
30.10.2018 VTC Baspik produces microchannel plates, including those with ultra-small channel diameter

High resolution MCPs with 3 µm channel diameter ideally suit for time-of-flight mass-spectrometry enhancing timing response. The enterprise plans to develop MCPs with 2 µm channel diameter in 2019.

19.10.2018 VTC Baspik produces a wide range of microchannel plates including those with the center hole

Center-hole MCPs are used in linear reflectron time-of-flight mass-spectrometry.The laser is pulsed through the MCP’s center hole, while the outer edges capture particles.

15.10.2018 VTC Baspik has started spherical microchannel plate development

MCPs curve spherically or cylindrically to match the focal plane of an instrument. Application: VUV spectroscopy. The first prototypes suitable for market testing will be developed by 2019.

01.10.2018 A photon counting photomultiplier tube (PMT) for UV spectral range has been designed exhibiting a unique value of peak-to-valley ratio

Photon detector is one of the main types of detectors in high-energy and nuclear physics. Photon counting is a fundamental method for the acquisition of maximum information from the light signal. This method is widely used for the detection of very weak light signals. PMTs with discrete dynodes, MCP-PMTs, avalanche diodes, hybrid PMTs are usually used as photon counting detectors. As compared to the other types of detectors MCP-PMT have the advantage of high gain and fast response, larger active area, low power consumption, stable operation under exposure to magnetic fields.. More...